WEAR RESISTANCE OF HIGH CHROMIUM CAST IRONS
Article Sidebar
Main Article Content
Abstract
White cast irons have long been used to provide wear resistance. The main requirement is good wear resistance with moderate resistance to brittle fracture. With the exception of low-alloy pearlitic cast iron, there are two main groups described as nickel-chromium and high-chromium cast iron
Article Details
References
The University of Queensland, Hamid Pourasiabi Lighvan, “Development and performance evaluation of abrasion-resistant white cast irons containing macro-additions of niobium carbide” 2020.
U. Pranav Nayak, Sebastian Suárez, Valentin Pesnel, Frank Mücklich & María Agustina Guitar. “Load dependent microstructural evolution in an as-cast 26% Cr high chromium cast iron during unlubricated sliding”. Research Article, Open access, Published: 07 December 2021 Volume 10, pages 1258–1275, (2022).
Pokusová Marcela, Berta Igor, Šooš Ľubomír. “Abrasion resistance of as-cast high-chromium cast iron”. Scientific proceedings 2014, Faculty of Mechanical Engineering, SUT in Bratislava Vol. 22, 2014, pp.74‐79. 4. Nozimjon Kholmirzaev, Bakhtiyor Kasimov, Bahodirjon Abdullayev, Asatov Sunnatillo, & Abdullaev Farrux. (2021). INCREASING THE LIFETIME OF TILLAGE MACHINE OF PLOWSHARES MADE STELL MADE BY FOUNDRY TECHNOLOGIES. JournalNX - A Multidisciplinary Peer Reviewed Journal, 7(11), 55–59. https://doi.org/10.17605/OSF.IO/QB5TF
Turakhodjaev, N., Kholmirzaev, N., Saidkhodjaeva, S., & Kasimov, B. (2021). Quality improvement of the steel melting technology in an electric arc furnace. ACADEMICIA: An International Multidisciplinary Research Journal, 11(7), 48-54.
Nosir, S., Nodir, T., Kamol, A., Nozimjon, K., & Nuritdin, T. (2022). Development of quality steel alloy liquidation technology. American Journal of Interdisciplinary Research and Development, 7, 74-83.
Kholmirzaev, N., Turakhodjaev, N., & Sadikova, N. (2023). Improvement of the Melting Technology of 35XГСЛ Brand Steel Alloy in An Electric ARC Furnace. Role of Exact and Natural Sciences During the Renaissance III, 60-64.
Turakhodjaev, N. (2022). Technology for cleaning non-metallic inclusions and gaseous pores in the process of liquefaction of steels in an electric arc furnace. European Multidisciplinary Journal of Modern Science, 4, 77-82.
Kholmirzaev, N., Abdullaev, F., Turakhodjaev, N., Akramov, M., & Makhamatmuratov, U. (2022). Development of Technology of Mading Shafts from 35XGCL Brand Steel Alloy.