METHODOLOGY OF CHROME (CR) ELEMENT RECOVERY DURING MELTING OF LOW-ALLOY STEEL ALLOY IN AN ELECTRIC ARC FURNACE
Article Sidebar
Main Article Content
Abstract
The main purposes of adding alloying elements to steel are:
1) improvement and expansion of existing properties of ordinary carbon steels;
2) development of new properties that do not exist in ordinary carbon steels.
Thus, the addition of a small amount of chromium leads to the improvement of its main properties, such as strength and purity, while a large amount of these elements also improves the properties of austenite, such as the stabilization of austenite at room temperature, the loss of magnetic properties, and very high resistance to corrosion.
Article Details
References
Nozimjon Kholmirzaev, Bakhtiyor Kasimov, Bahodirjon Abdullayev, Asatov Sunnatillo, & Abdullaev Farrux. (2021). INCREASING THE LIFETIME OF TILLAGE MACHINE OF PLOWSHARES MADE STELL MADE BY FOUNDRY TECHNOLOGIES. JournalNX - A Multidisciplinary Peer Reviewed Journal, 7(11), 55–59.
https://doi.org/10.17605/OSF.IO/QB5TF
Kholmirzaev N., Sadikova N., Abdullayev B., Madiev T., Mutalov B., & Duysebaev J. (2023). Technology of Processing the Liquid Steel Alloy Obtained in an Electric ARC Furnace Outside the Furnace. Central Asian Journal of Theoretical and Applied Science, 4(4), 61-64. https://doi.org/10.17605/OSF.IO/MBQ3E
N. Kholmirzaev, S. Saidkhodjaeva, N. Turakhodjaev, S. Shukuraliev, X. Mavlyankulova and B. Abdullayev, “Determination of Hardness of 35xgcl Steel Alloy by Brinell Method”, WoS, vol. 2, no. 4, pp. 31–34, Apr. 2023.
Kholmirzaev N., Turakhodjaev N., Ermanov O., Ibragimov A., Sultonov A., & Turaev A. (2023). Mathematical Modeling of the Effect of Titanium (TI) Added as a Modifier on the Wear Resistance of a Low-Alloyed Steel Alloy. Central Asian Journal of Theoretical and Applied Science, 4(4), 55-60. https://doi.org/10.17605/OSF.IO/KA6P5
Turakhodjaev N., Kholmirzaev N., Saidkhodjaeva S., & Kasimov B. (2021). Quality improvement of the steel melting technology in an electric arc furnace. ACADEMICIA: An International Multidisciplinary Research Journal, 11(7), 48-54.
Nosir S., Nodir T., Kamol A., Nozimjon K., & Nuritdin T. (2022). Development of quality steel alloy liquidation technology. American Journal of Interdisciplinary Research and Development, 7, 74-83.
Kholmirzaev N., Turakhodjaev N., & Sadikova N. (2023). Improvement of the Melting Technology of 35XГСЛ Brand Steel Alloy in An Electric ARC Furnace. Role of Exact and Natural Sciences During the Renaissance III, 60-64.
Turakhodjaev N. (2022). Technology for cleaning non-metallic inclusions and gaseous pores in the process of liquefaction of steels in an electric arc furnace. European Multidisciplinary Journal of Modern Science, 4, 77-82.
Kholmirzaev N., Abdullaev F., Turakhodjaev N., Akramov M., & Makhamatmuratov U. (2022). Development of Technology of Mading Shafts from 35XGCL Brand Steel Alloy.