PARAMETERS OF THE RIPPER-MOLE KNIFE

Main Article Content

F M Mamatov, Y Rajabov

Abstract

The purpose of the study is to substantiate the parameters of the ripper-mole knife. The technological scheme of the ripper-mole is given. To increase the stability of the drain and reduce the traction resistance, a knife is attached to the main working organ-the deep-hole, to which the drainer is attached. When the tool moves forward, a thin flat knife cuts a vertical slit in the sub–arable soil layer, which subsequently breaks due to soil deformation, and a drainer attached to the knife with a chain forms a cylindrical cavity in the soil - a mole drain.  Analytical dependences are obtained for determining the height, the angle of sharpening the knife and the angle of installation of the knife to the horizon, as well as its traction resistance. Theoretical studies have established that the height of the ripper-mole knife should be 7.5 cm, the angle of sharpening 300 and the angle of installation to the horizon 220. At the same time, the traction resistance of the knife depends on the parameters of the knife, the depth of tillage and the physical and mechanical properties of the soil.

Article Details

How to Cite
F M Mamatov, Y Rajabov. (2024). PARAMETERS OF THE RIPPER-MOLE KNIFE. Uz-Conferences, 2, 452–459. Retrieved from https://uz-conference.com/index.php/p/article/view/395
Section
Articles

References

F. Mamatov, N. Aldoshin, B. Mirzaev, H. Ravshanov, Sh. Kurbаnov, N. Rashidov, Development of a frontal plow for smooth, furless plowing with cutoffs, IOP Conf. Series: Materials Science and Engineering 1030, 012135 (2021).

F.Juraev, Y.Rajabov, A.Juraev, C.Turaev, U.Rajabov. On the role of application of the double drainage-hole technology, The Way of Science International scientific journal. – Volgograd, 2014. – № 11 (57), pp. 27-29.

F Jurayev, Y Rajabov, N Farmonov, A Jo’raev. Development of technology and equipment for improving the reclamation state of saline soils, E3S Web of Conferences 264, 04018 (2021).

K Ravshanov, K Fayzullaev, I Ismoilov, D Irgashev, S Mamatov, Sh Mardonov. The machine for the preparation of the soil in sowing of plow crops under film, IOP Conf. Series: Materials Science and Engineering 883 (2020) 012138.

K Fayzullaev, F Mamatov, B Мirzaev, D Irgashev, S Mustapakulov and A Sodikov. Study on mechanisms of tillage for melon cultivation under the film, E3S Web of Conferences 304, 03012 (2021).

Shodmonov G.D., Chuyanov D.Sh., Ergashov G.X., Choriev I. Combination machine for soil preparation and sowing of gourds, E3S Web of Conferences, 264, 04035 (2021).

K Ravshanov, K Fayzullaev, I Ismoilov, D Irgashev, S Mamatov, Sh Mardonov. The machine for the preparation of the soil in sowing of plow crops under film, IOP Conf. Series: Materials Science and Engineering 883 (2020) 012138.

Ravshanov K, Fayzullaev K, Ismoilov I, Irgashev D, Mamatov S and Mardonov Sh. The machine for the preparation of the soil in sowing of plow crops under film, IOP Conf. Series: Materials Science and Engineering 883(2020) 012138.

Chuyanov, D., Shodmonov, G.,Avazov, I., Rashidov, N, Ochilov, S. Soil preparation machine parameters for the cultivation of cucurbitaceous crops, IOP Conf. Series: Materials Science and Engineering 883(2020) 012139.

Fayzullayev Kh., Mamatov S., Radjabov M., Sharipov Sh., Tavashov R, and NurmanovaM. The quality of loosening the soil with subsoilers of the combined machine, IOP Conf. Series: Materials Science and Engineering 1030 012171.

Maxamov X., Tovashov R., Tovashov B., Jabborov F. Combination machine for soil cultivation and sowing grain, International scientific conference «Construction mechanics, hydraulics and water resources engineering» 264, 04049 (2021).

Temirov I., Ravshanov Kh., Fayzullaev Kh., Ubaydullaev Sh., and Kodirov U. Development of a machine for preparing the soil for sowing melons under the film, IOP Conf. Series: Materials Science and Engineering 1030 012169.

Kodirov U., Aldoshin N., Ubaydullayev Sh., Sharipov E., Muqimov Z. and Tulaganov B. The soil preparation machine for seeding potatoes on comb, IOP Conf. Series: Materials Science and Engineering 883(2020) 012143.

N.Kholikova, B.Khakimov, S.Alikulov, N.Ravshanova, A.Mambetsheripova. Plant for cleaning oils from oxidation products, E3S Web of Conferences 264, 04043 (2021).

O.Hamroyev, N.Ravshanova, V.Jovliyev and S. Komiljonov. A method for cleaning tanks from oil product residues based on biotechnology, E3S Web of Conferences 264, 04052 (2021).

Tovashov R.Kh., Makhamov Kh.T., Tovashov B.R. Justification of Parameters of the Loosening Working Body, International Journal of Advanced Research in Science, Engineering and Technology Vol. 7, Issue 7 , July 2020. pp. 14336-14339.

Ravshanov H., Babajanov L., Kuziev Sh., Rashidov N., Kurbanov Sh. Plough hitch parameters for smooth tails, IOP Conf. Series: Materials Science and Engineering 883 012139.

F. Маiviatov, F. Karshiev, Sh. Gapparov. Movement of crushed stem particles when they interact with hammers, IOP Conf. Series: Earth and Environmental Science 868 012060 (2021).

F. Маiviatov, K. Ravshanov, S. Mamatov, I. Temirov, D. Kuvvatov, A. Abdullayev. Combined machine for preparing the soil for re-sowing crops, IOP Conf. Series: Earth and Environmental Science 868 012066 (2021).

Tovashov R.Kh., Makhamov Kh.T. Analysis of combined machines for minimal tillage of soil, International Journal of Advanced Research in Engineering and Technology Vol. 11, Issue 8, August 2020. pp. 609-616.

Kodirov U, Aldoshin N, Ubaydullayev S., Sharipov E, Muqimov Z and Tulaganov B. Study on plowing of cotton soil using two-tier plow, 2020 IOP Conf. Series: Materials Science and Engineering 883 012143.

Mirzaev B S, Ergashov G H, Maiviatov F M, Ravshanova N B, Toshtemirov S J and Begimkulova M F. Justification of the parameters of the lister body, IOP Conf. Series: Earth and Environmental Science 1076(2022) 012022.

Fayzullayev, Kh, Mamatov, S, Radjabov, M, Sharipov, Sh, Tavashov, R and Nurmanova, M. The quality of loosening the soil with subsoilers of the combined machine, IOP Conf. Series: Materials Science and Engineering 1030 (2021) 012171.

Shodiev, Z. O., Inoyatov, I. S., & Shodiev, N. S. (2020). NATURAL PASTE AND ITS VALUE TODAY. In Эффективность применения инновационных технологий и техники в сельском и водном хозяйстве (pp. 198-200).

J.Sh.Fazliev., Sh.M.Tojiev., Sh.D.Khalikov. (2024). EFFICIENCY OF USE OF CLAY WATER WITH DROP IRRIGATION. Uz-Conferences, 1(1), 504–509. Retrieved from https://uz-conference.com/index.php/p/article/view/107

I.J.Xudayev, I.J.Xudayev, & Sh.M.Tojiyev. (2024). NAMLATGICH-BLOKLARDAN HOSIL QILINGAN EKRANLI EGATLARDAN G‘O‘ZANI SUG‘ORISH TEXNOLOGIYASI. Uz-Conferences, 1(1), 514–519. Retrieved from https://uz-conference.com/index.php/p/article/view/109

Fazliyev, Z. S., Shokhimardonova, N. S., Sobirov, F. T., Ravshanov, U. K., & Baratov, S. S. (2014). Technology of the drip irrigation use in gardens and vineyards. The Way of Science, 56.

Shodiyev Ne’matjon. (2024). INTEGRATIV YONDASHUV ASOSIDA UMUMKASBIY FANLARNI O‘QITISHNING ZAMONAVIY TEXNOLOGIYALARI. Uz-Conferences, 1(1), 945–950. Retrieved from https://uz-conference.com/index.php/p/article/view/195

Shodiyev Ne’matjon. (2024). TEXNIKA OLIY TA’LIM MUASSASALARIDA UMUMKASBIY FANLARNI AXBOROT TA’LIM MUHITIDA O‘QITISHNING MUHIM YO‘NALISHLARI. Uz-Conferences, 1(1), 938–944. Retrieved from https://uz-conference.com/index.php/p/article/view/194

Fazliyev, J. (2017). Drip irrigation technology in gardens. Интернаука. Science Journal, 7(11).

Фазлиев, Ж.Ш.(2017).Боғларда томчилатиб суғориш технологияси. Интернаука,(7-3),71-73.

Ikrom, I. (2023). KASBIY TAYYORGARLIKNING RIVOJLANISH DINAMIKASI BO’YICHA PEDAGOGIK TAJRIBA-SINOV ISHLARI NATIJALARINING TAHLILI. In Uz-Conferences (Vol. 1, No. 1, pp. 626-633).

Shaxrilloevich, I. I. (2023). DIDACTIC CONDITIONS FOR THE PREPARATION OF STUDENTS OF VOCATIONAL EDUCATION FOR PROFESSIONAL ACTIVITY BASED ON AN INNOVATIVE APPROACH. Academia Repository, 4(10), 142-145.

Саримсаков, М. М. (2023, May). СПОСОБЫ ПОЛИВА И УРОЖАЙНОСТЬ ИНТЕНСИВНЫХ ЯБЛОНЕВЫХ САДОВ. In INTERNATIONAL SCIENTIFIC RESEARCH CONFERENCE (Vol. 2, No. 14, pp. 173-175).

Фазлиев, Ж. Ш., & Шохимарданова, Н. Ш. (2024). БОҒЛАРНИ ТОМЧИЛАТИБ СУҒОРИШДА ТУПРОҚ-ГРУНТ НАМЛАНИШ КОНТУРИНИ АНИҚЛАШ УСЛУБИ. IMRAS, 7(2), 34-38.

Sadirovich, S. N. (2022). The Significance of Problem Situation Assignments in Teaching the Science of Machine Details. Central Asian Journal of Theoretical and Applied Science, 3(8), 30-32.

Shodiev, N. S. (2022). USE OF PEDAGOGICAL TECHNOLOGIES IN PREPARING ENGINEERING STUDENTS FOR PROJECT-CONSTRUCTION ACTIVITY. Экономика и социум, (10-2 (101)), 167-169.

AZ, S. Z. S. N. S. (2020). Analysis of the work on improving the design of dryers inside the ginning plants and the mode of drying.

Shodiyev Ziyodullo Ochilovich, & Shodiyev Nematjon Sadirovich. (2022). KINEMATIC STUDY OF FLAT BASE MECHANISMS. E Conference Zone, 61–69. Retrieved from https://www.econferencezone.org/index.php/ecz/article/view/888

Ochilovich, S. Z. (2020, September). Inoyatov Ikrom Shaxriloyevich, Shodiyev Ne'matjon Sadirovich. Tabiiy yaylovlar va uning bugungi kundagi ahamiyati. In Эффективность применение инновационных технологий и техники в сельском и водном хозяйстве» международная научно-практическая онлайн-конференция (pp. 25-26).

Shodiyev, Z. O., & Shodiyev, N. S. (2020). TO STUDY THE EFFECT OF THE MESH SURFACE ON THE SEED COTTON DURING THE SEPARATION OF COTTON FROM THE AIR STREAM. In Эффективность применения инновационных технологий и техники в сельском и водном хозяйстве (pp. 121-122).

Shodiyev, Z. O., & Shodiyev, N. S. (2020). KEY FACTORS FOR INCLUSION IN THE EXPERIMENTAL DESIGN IN THE СXM SEPARATOR AND THEIR IDENTIFICATION. In Эффективность применения инновационных технологий и техники в сельском и водном хозяйстве (pp. 119-121).

Musinovich, S. M. (2023, June). DRIP IRRIGATION INTENSIVE APPLE ORCHARDS AND SEASONAL WATER CONSUMPTION. In Proceedings of Scientific Conference on Multidisciplinary Studies (Vol. 2, No. 6, pp. 8-14).

Khamidov, M. K., Juraev, U. A., Buriev, X. B., Juraev, A. K., Saksonov, U. S., Sharifov, F. K., & Isabaev, K. T. (2023, February). Efficiency of drip irrigation technology of cotton in saline soils of Bukhara oasis. In IOP Conference Series: Earth and Environmental Science (Vol. 1138, No. 1, p. 012007). IOP Publishing.

Sharifov Firdavs, & Mirzamurotov Mirshod. (2024). G‘O‘ZA O‘SIMLIGINI YETISHTIRISHDA SUV TEJAMKOR SUG‘ORISH TEXNOLOGIYALARINI QO‘LLASH. Uz-Conferences, 1(1), 461–464. Retrieved from https://uz-conference.com/index.php/p/article/view/98

Sattorovich, S. U., & Qobil o‘g‘li, S. F. (2022). BUG ‘DOY O ‘SIMLIGI VA DONINING XALQ XO ‘JALIGIDA BUGUNGI KUNDAGI AHAMIYATI.

Xamrayev Kamol, Sharifov Firdavs, & Yusupova Oynura. (2024). TUPROQ SHO‘RINI YUVISHDA BIOSOLVENT BIRIKMASINI TUPROQ SUV-TUZ MUVOZANATIGA TA’SIRI. Uz-Conferences, 1(1), 458–460. Retrieved from https://uz-conference.com/index.php/p/article/view/97

Khudaev, I. J., & Shoximardanova, N. S. (2023). FEATURES OF DRIP IRRIGATION OF CROPS. PEDAGOGICAL SCIENCES AND TEACHING METHODS, 2(24), 157-160.

Худаев, И. Ж., & Шохимарданова, Н. Ш. (2023). ҚОВУН ПОЛИЗ ЭКИНИНИНГ БИОЛОГИК ВА МОРФОЛОГИК ХУСУСИЯТЛАРИ. In Uz-Conferences (Vol. 1, No. 1, pp. 479-482).